Automatic Cutting Machines

Automatic Wire & Tube Cutter

These truly automatic cutting machines cut medical tubing, electrical wire, coax cable, PVC tubing, heat shrink and much more. They are rugged, dependable, reasonably priced and easy to use. Because these units weigh only 18 pounds, they are portable and can be easily moved from one place to another. This allows you to share one cutter among several departments if needed.


Which Automatic Cutting Machine is Right for Your Application?

The diameter of material and quietness of operation will be the primary determination of which machine you will need.

  • Hook-up wire
  • Flexible tubing rubber, silicone, PVC, vinyl, etc.
  • Heat shrink tubing
  • Magnetic wire
  • Thermocouple wire
  • Audio and marine wire
  • Steel and buss wire
  • Power and zip cord
  • Telephone cable and twisted pairs
  • Coax and multi-conductor cable
  • Plastic strapping and nickel strips
  • Cording, custom formed materials

The Automatic Cutter II is ideal for cutting nearly any smaller wire, coax cable or tubing.

Automatic Cutter II
  • Hook-up wire, (12 to 40 Awg, or equivalent)
  • Flexible tubing, (to 3/8″ OD)
  • Heat shrink tubing (to 1/4″ OD)

The Automatic Cutter III is ideal for cutting larger material.

Automatic Cutter III
  • Hook-up wire, (10 to 20 Awg, or equivalent)
  • Flexible tubing, (to 1/2″ OD)
  • Heat shrink tubing (to 3/8″ OD)

Prices Starting at $2,935

The Pneumatic Auto Cutter IV is our newest automatic cutter for cutting heavier, thicker materials that others can’t. Air-powered knife blade allowing thousands of pieces to be cut effortlessly. Programming and footprint is exactly the same as the Automatic Cutter II and III. Quieter than a solenoid application. It will cut large quantities of material such as:

Automatic Cutter IV
  • PEX tubing
  • Double-wall, fiber-reinforced tubing
  • SO wire/cord
  • 8g THHN wire

All of our automatic cutters have many great features:

  • Pulls material directly from spools (no pre-feeder required)
  • No set-up required – can be adjusted for all materials from smallest up to 3/8″
  • Portable, bench-top design for easy moving
  • Simple and intuitive to operate (easier than setting a clock)
  • All 120V electric (Auto Cutter IV also requires 100-120psi air)
  • Full one-year warranty
  • Truly automatic operation – just program and watch it run
  • Eliminates all cutting labor and waste
  • Improves safety

Each automatic cutter includes:

  • Free shipping on your new cutter (within the continental US)
  • Free full one-year warranty
  • Free 30-day trial – with pre-approved samples

Rubber Rollers Upgrade
Any steel knurled roller can leave minor marks on some soft tubing. To avoid this, we offer rubber rollers at a nominal additional fee of $250. If you need to cut delicate materials, our rubber rollers are the solution.

*Only end users buying directly from Cutter Industries are eligible for this warranty.
**Free 30-day trials are available on the Automatic Cutters II and III.